A compact disc format for panel, mirror and bottle-cutting workflows.
2Size OptionsMatched disc diameter and bore combinations
100×20100mm Version100mm outer diameter with 20mm center bore
115×22.23115mm Version115mm outer diameter with 22.23mm center bore
OEMWholesale SupportLabel, sleeve, barcode and carton-mark options
Product Overview
BK-9081 Glass King Cutting Disc
A green ultra-thin continuous-rim diamond disc developed for controlled cuts and edge refinement on glass and other brittle materials. Its uninterrupted working rim supports stable contact without aggressive segmented teeth.
Add a clear glass-specific item to angle-grinder and diamond-tool programs.
Supply size-marked retail packs with application and safety information.
Confirm color, label, barcode, sleeve artwork and master-carton marks.
Engineering Structure
Continuous Rim, Thin Kerf, Stable Contact
The smooth steel center supports the disc while the textured outer diamond band performs the cutting. The continuous circular edge helps maintain contact on brittle workpieces.
- Glass
- Mirror
- Crystal
- Jade
- Porcelain
- Ceramic Tile
A broad visible abrasive zone supports cutting and light edge refinement.
No teeth or segmented gaps; the working edge remains uninterrupted.
The thin profile is designed to reduce cutting resistance and material loss; final thickness follows the approved item.
Bright product color helps distinguish the glass-cutting series in retail and wholesale channels.
Close-Up Inspection
Purchase-Critical Details Shown Clearly
The working band, center bore and thin profile are separated for sample approval and bulk-production comparison.
Working RimDense Diamond Texture
Inspect visible coverage, texture consistency and obvious bare areas against the approved sample.
Disc ProfileUltra-Thin Cutting Body
A straight, even profile supports controlled tracking; thickness is confirmed against the selected item.
MountingMatched Center Bore
100mm uses a 20mm bore; 115mm uses a 22.23mm bore. Check flange contact before installation.
Technical Data
Two Matched Size Options
BK-9081 is supplied in 100×20mm and 115×22.23mm combinations. Final thickness, maximum operating speed and packing data are confirmed against the approved sample and purchase order.
ModelBK-9081
- Product
- Ultra-Thin Diamond Glass Cutting Disc
- Size Option 1
- 100mm outer diameter × 20mm bore
- Size Option 2
- 115mm outer diameter × 22.23mm bore
- Disc Thickness
- Confirmed by selected item and approved sample
- Abrasive Band Width
- 15mm reference
- Rim Type
- Continuous diamond working rim
- Compatible Tool
- Compatible 4-inch angle grinder / cutting machine
- Primary Uses
- Cutting / trimming / light edge refinement
Compatibility noteConfirm bore, flange, guard clearance, rotation direction and maximum operating speed before use. Secure brittle workpieces and follow the power-tool manufacturer's instructions.
Information required for an accurate quotationDiameterBoreThicknessQuantityPackagingDestination
Application Scenario
Controlled Glass Cutting with Correct Guarding
The disc is mounted on a compatible guarded angle grinder and brought into a secured glass workpiece with a stable, controlled feed.
Operating note
Use the tool guard and eye, hand, hearing and respiratory protection. Confirm whether dry or wet processing is permitted for the approved item and power tool. Do not twist or side-load an ultra-thin disc.
Factory Supply Control
Five Checks Before Packing
Bulk orders are compared with the approved sample for size, flatness, bore, abrasive coverage and packaging.
Confirm outer diameter, bore, thickness and abrasive-band width.
Inspect the disc body for visible distortion, impact damage or edge deformation.
Review abrasive coverage, continuous edge condition and obvious bare areas.
Count each item and confirm the order mix before final packing.
Confirm sleeve, label, barcode, carton quantity and carton marks.
Packaging Options
Protection for a Thin Precision Disc
Flat individual protection helps keep the disc separated during transport. OEM retail packaging is prepared after the product sample and artwork are approved.
Flat protective sleeve or card with model, size, bore and safety information.
Quantity-controlled inner box with separators for wholesale handling.
Buyer logo, item number, barcode, application icons and carton marks.
1Send RequirementsSize, bore, quantity and destination
2Confirm SampleProfile, cutting test and dimensions
3Approve ArtworkLabel, barcode and carton mark
4Production and QCInspection against approved sample
5Packing DataQuantity, weight and carton dimensions
B2B Inquiry
Build a Clear BK-9081 Request
Enter the basic order details to prepare a professional English inquiry message for the sales team.
Jishan County Boke Diamond Tools FactoryWest of Duanbi Village, Qinghe Town, Jishan County, Yuncheng City, Shanxi Province, ChinaSales contact: +86 137 5398 9893