Add a distinctive woodworking accessory to angle-grinder and cutting-tool programs.
105mmReference DiameterCompact woodworking disc class
20mmReference BoreConfirm flange compatibility before order
10Stress-Relief SlotsEvenly distributed keyhole geometry
OEMWholesale SupportLabel, sleeve, barcode and carton marks
Product Overview
BK-9082 Woodworking Cutting Disc
A thin blue alloy-steel disc with dense, low-profile hard-alloy micro-teeth around the cutting rim, a reinforced center bore and evenly distributed keyhole relief slots. It is prepared for controlled straight cutting on approved materials with a compatible guarded power tool.
Supply clearly marked retail packs with size, speed and safety information.
Prepare samples for controlled cutting tests on approved wood materials.
Confirm color, item number, barcode, sleeve artwork and carton marks.
Engineering Structure
Fine Alloy Edge with Keyhole Relief Slots
Closely spaced hard-alloy micro-teeth form the working edge while the reinforced center supports flange contact. Keyhole-shaped slots divide the outer body into evenly spaced sections.
- Solid Wood
- Plywood
- MDF
- Particle Board
- PVC Board
- Wood Composite
Dense, low-profile metallic serrations form the cutting rim without large conventional saw teeth.
Narrow radial slots terminate in rounded relief points around the perimeter.
The raised circular center supports stable flange contact around the arbor hole.
A consistent cobalt-blue finish provides a clear retail identity for the series.
Close-Up Inspection
Structure Buyers Can Check Before Ordering
Slot geometry, center bore and thin body are separated for sample approval and bulk-production comparison.
Perimeter GeometryKeyhole Relief Slot
Check slot count, spacing, rounded termination and visible cracks against the approved sample.
MountingReinforced Arbor Area
Confirm bore diameter, flange contact and visible deformation before installation.
Cutting RimDense Alloy Micro-Teeth
Check tooth density, rim continuity, bonding consistency and visible edge damage against the approved sample.
Technical Data
Reference Size and Order Confirmation
The current market reference is a 105mm-class disc with a 20mm bore. Final diameter, bore, thickness, maximum operating speed and compatible tool must be confirmed against the approved sample and purchase order.
ModelBK-9082
- Product
- Blue Woodworking Cutting Disc
- Reference Diameter
- 105mm
- Reference Bore
- 20mm
- Disc Thickness
- Confirmed by selected item and approved sample
- Body Material
- Blue-finished alloy steel with a fine hard-alloy micro-tooth rim
- Perimeter Structure
- Approximately 10 evenly spaced keyhole relief slots
- Primary Uses
- Straight cutting on approved wood-based materials
- Customization
- Color, item label, barcode, sleeve and carton mark
Compatibility noteConfirm that the power-tool manufacturer permits this accessory. Match the guard, flange, bore and speed rating to the approved disc before use.
Information required for an accurate quotationDiameterBoreThicknessQuantityPackagingDestination
Application Scenario
Guarded Cutting on a Secured Workpiece
The disc is mounted on a compatible guarded tool and brought through a securely clamped wood workpiece using stable two-hand control.
Operating note
Use only with a compatible guarded tool and follow the tool and accessory manufacturers' instructions. Secure the workpiece, use eye, hearing and respiratory protection, keep both hands on the tool and never twist or side-load the disc.
Factory Supply Control
Five Checks Before Packing
Bulk orders are compared with the approved sample for dimensions, flatness, slots, bore and packaging.
Confirm outer diameter, bore and body thickness against the selected item.
Inspect micro-tooth density, rim continuity, bonding consistency and visible edge damage.
Review slot count, spacing, rounded ends and visible cracks.
Check the arbor opening and reinforced center for deformation or obstruction.
Confirm sleeve, label, barcode, carton quantity and carton marks.
Packaging Options
Flat Protection and Clear Safety Information
Individual flat packaging helps protect the thin steel body. OEM artwork is prepared only after the sample, dimensions, speed marking and safety copy are approved.
Model, size, bore, maximum speed, rotation and safety information.
Separated stacks with quantity and item labels for wholesale handling.
Buyer logo, item number, barcode, application icons and carton marks.
1Send RequirementsSize, bore, quantity and destination
2Confirm SampleStructure, dimensions and cutting test
3Approve ArtworkLabel, speed marking and barcode
4Production and QCInspection against approved sample
5Packing DataQuantity, weight and carton dimensions
B2B Inquiry
Build a Clear BK-9082 Request
Enter the basic order details to prepare a professional English inquiry message for the sales team.
Jishan County Boke Diamond Tools FactoryWest of Duanbi Village, Qinghe Town, Jishan County, Yuncheng City, Shanxi Province, ChinaSales contact: +86 137 5398 9893